More Transmitter Circuits

 

More Transmitter Circuits

The transmitter coil L1 for all the following circuits are created by hand winding 4 turns of 18 to 22 SWG super enameled copper wire over a 1 cm air cored former, using card board or plastic for the former material. The number of turns of L1 can be manually adjusted so that FM transmitter circuits are able to transmit signals within the high VHF range using 2 or 3 turns for L1, or across the lower VHF range of 50 to 80 MHz using 5 to 7 turns for L1.

The variable capacitor connected parallel to the coil L1 in the all the following circuits can be a 33 pF trimmer or any FM gang capacitor.